Yapi Müşavirlik Taahhüt ve Dış Ticaret Limited Şirketi
BIOMODULE
BIOMODULE is a variant of the activated sludge biological process which allows continuous inflow of raw wastewater and intermittently discharged influent.
Provides flow equalization, biological oxidation and sedimentation with decanting of supernatant in a single tank.
Process can be operated on any cycle duration based on the required degree of treatment. Each cycle consist of aeration, sedimentation and decantation phases. The aeration phase can be operated on an oxic/anoxic mode for the purpose of nitrification/denitrification and biological phosphorus removal. Oxygen is provided to the mixed liquor by the blowers and aeration system. The blowers are either positive displacement or centrifugal type. The most common aeration system utilizes coarse bubble diffusers. Jet aeration and fine bubble system have been used effectively as well. A master control center completely automates the process.
BIOMODULE-MBR
BIOMODULE-MBR combines biological water treatment with en extra membrane filtration section. Such combined treatment allows water to be reused both for domestic and industrial use.
Uses submerged or internal Membrane BioReactors are flatsheet high flux membrane systems. They are based on the perfect combination of special developed UF-membrane modules with the established BioModül-MBR activated sludge process.
Is compiled in a very compact, modular and custom-built plant.
Ideal solution for upgrade and improvement of existing treatment facilities. Treatment of highly polluted industrial wastewater and leachate for safe discharge according to stringent standards.
Effluent can be used in irrigation, also with the addition of a Reverse Osmosis option; the treated water can be recycled for industrial and potable use.
High nitrogen removals due to the combination of high biomass concentrations and multistaged reactor configuration with alternated anoxic and aerated zones.
Small plant footprint due to higher biomass concentration in the bioreactor Lower excess sludge production compared to conventional systems.
Do not exist odour.
Is very simple to operate and easy maintenance.
Is designed for full automatic working.
BIOCOMPACT
BIOCOMPACT is applied for the biological treatment of wastewaters from various sources, municipal as well as industrial.
In which two tanks operate alternately, exploits this feature, so that its operation is particularly simple and reliable, making it very viable.
Consists of two identical tanks and each tank is equipped with an aeration system (either fine bubble aeration or surface aeration). The outlet from tanks each of which have overflow weirs. From the bottom of the tanks, two valves discharge the excess sludge. The raw wastewater enters the tanks with two pneumatic valves which can direct the flow to be treated to tanks. Outlet two valves can cut off the flow at the outlet from the tanks. The two tanks communicate either by a weir or a pipe.
With biological nutrient removal can meet very stringent effluent requirements for BOD, nitrogen and phosphorus. Has the ideal low investment solutions for the small scale applications (small community and industry).
Systems are particularly suitable for installations intended to be subsequently enlarged.
Who are we?
About our company
We stand out as an experienced specialist company that successfully implements sustainable processes in the sector.
As Interestate Yapi Müşavirlik Taahhüt ve Dış Ticaret Limited Şirketi we have established many facilities with unique technological solutions for contracting, project-design and sustainable processes in Environmental Technology application areas such as;
-Industrial and Domestic Wastewater Treatment -Drinking and Potable Water Treatment -Process Water Preparation
-Wastewater Recovery
-Agricultural Infrastructure and Energy Production from Biomass.
Hüseyin Ulusoy
General manager
LIST OF MECHANICAL EQUIPMENTS & TOOLS FOR WTP & WWTP PROJECT
Penstocks automatic or manual
Italy, Holand, Spain, Turkey
Bridge Scrapers with -noge and foaming tanks for clarifing tanks
Italy, Holand, Spain, Turkey
Bridge mixers and scrapers for thickingsystem at thickning tanks
Italy, Holand, Spain, Turkey
Aerators for Extended Aeration Tanks
Italy, Holand, Spain, Turkey, Germany
Mixers for tanks of Extended Aeration Tanks & Bio Tanks
Italy, Holand, Spain, Germany, Sweeden, Belgium
Fire fighting system
Turkey, Italy, Germany
All Types of vertical pumps dry flow and submersible types
Germany, Sweeden, Italy, Belgium
Valves and fittings
Italy, Germany , Turkey
All types of Odar Removal System
German, Italy , Turkey
Classifiers system
Spain, Italy, Turkey
Conveyior belts or screw types
Italy, Spain, Turkey
All dimeter of Ductile Iron Pipes K9&K12
China, Turkey, India, Saudia Arabia
Our Services
1
Our company specializes in the design and manufacture of WTP & WWTP equipment. Operating from our own production facilities and partnering with leading European manufacturers, we provide comprehensive tooling solutions. We guarantee that all equipment is handled and installed to the highest project standards and our clients' full satisfaction.
2
Our technical staff works closely with the client's team to ensure the shortest possible delivery times.
3
We perform comprehensive calculations to minimize costs and optimize production timelines.
We provide flexible post-installation support, ensuring our clients receive all necessary technical guidance and clarifications after supply and commissioning.
